Delivery Checklist

Your stair lift will be delivered in 2 boxes;

• 1 long carton - containing rail
• 1 square carton - containing the carriage, seat and fitting kits

Carefully unpack and layout the components. You should have the following;

The Carriage Assembly

- comprising stair lift chassis with yellow moulded plastic cover. Fitted folding footrest with 3 safety cut-out sensors, the lower surface and the 2 side edges.

The Seat Assembly

- comprising seat with folding front squab and arm rests, swivel locking lever (fitted) operable from both sides, removable seat pads and a lap harness.

The Rail Assembly

- this is supplied in two pre-wired sections. Each will have charge points and limit stops fitted. The bottom section has a beveled end.

The Fitting Kit

• 4 x Rail Brackets
• Bottom Safety Edge for carriage
• Rail End Cap
• Transformer
• Short section of rack
• Hand Winding Wheel
• 'AmeriGlide' Badge
• 2 x Remote Control wall mounting brackets
• Screws - 16 x Wood screws, 2 x plastic screws, 2 x 'stand-off' screws